Van Wraps & Car Graphics in Brighton
Van Wraps in Brighton, Done Properly
A van wrap in Brighton is not a niche product. It is one of the most cost-effective forms of advertising available to a local business, and when it is done well, it works every hour the vehicle is on the road or parked in view. The challenge is getting it done well: the design, the print quality and the fitting all have to be right, because a poorly fitted wrap looks worse than no wrap at all.
At Odysea Signs we design, print and fit van wraps and car graphics in-house at our Brighton base. We have been wrapping vehicles for businesses across Brighton, Hove and Sussex since 2017, using 3M vinyl as standard. Whether you need a full wrap on a single van, car graphics for a branded fleet or a partial wrap on a company car, we handle the whole job from brief to fitting.
Full and Partial Van Wraps for Brighton Businesses
A vehicle wrap is vinyl sheeting printed with your design and applied directly over the vehicle's paintwork. It is removable, it protects the paint underneath, and when the material and installation are good quality, it can last five to eight years before needing replacement.
Full van wraps
A full wrap covers the entire exterior of the vehicle from bumper to bumper, including the roof, bonnet, tailgate and door returns. It gives maximum surface area for your design and, done properly, looks like a factory-finished vehicle rather than something applied after the fact. Full wraps take up to two days to install depending on the van size and complexity of the design.
Full van wraps in Brighton are most commonly ordered by businesses that want a strong, visual brand statement on the road: food and drink businesses, creative agencies, tradespeople who want their van to do real advertising work, and any company running a vehicle that is going to be parked in high-footfall areas.
Partial van wraps
A partial wrap covers a defined section of the vehicle rather than the whole thing. Typically this means the sides, the rear, or a combination of panels chosen for maximum visibility. Partial wraps use less material and take less time to fit, which brings the cost down while still delivering strong brand presence.
Partial wraps work particularly well when combined with cut vinyl lettering on the remaining panels, which gives a coherent branded result across the full vehicle without the cost of a complete wrap. We design these as integrated schemes rather than separate elements.
Printed panel graphics
For businesses who want full-colour printed branding on specific sections of the vehicle without wrapping the whole surface, printed panels applied to doors, side panels and the rear are a practical middle ground. The result sits between a signwritten van and a full wrap in terms of visual impact and cost, and can be removed and replaced when the brand or the van changes.
For the full range of vehicle wrap options, our vehicle wrapping service page covers the detail. See examples of our vehicle work in the works portfolio.
Years of signage experience
Custom, tailored designs
Projects
Turnaround on quotes
.webp)
Case studies
Car Graphics and Fleet Branding, Designed and Fitted In-House
Car graphics in Brighton
Car graphics for company cars typically involve a combination of printed panels and cut vinyl, applied to the doors, rear and bonnet. Full car wraps in a colour-change or branded finish are also possible and increasingly popular for businesses that want their cars to look as distinctive as their vans.
We design car graphics to work with the vehicle's shape rather than against it. Panel edges, door handles, mirrors and the curvature of the bodywork all have to be factored into the design before anything is sent to print. Getting this wrong at the design stage results in a finished wrap that looks misaligned or amateurish regardless of the print quality.
Fleet branding across multiple vehicles
Consistent fleet branding requires more than printing the same design on multiple vehicles. Different van models have different dimensions, different door configurations and different panel shapes. We template every vehicle in the fleet before producing graphics so the positioning, proportions and colour match precisely across every vehicle, whether it is a small car-derived van or a full-size Sprinter.
Fleet projects are quoted per vehicle with volume considered. For businesses running three or more vehicles, the per-vehicle cost typically reduces with scale, and we can phase the production and fitting around your operational requirements to keep disruption to a minimum.
Wrap or Signwriting?
The most common question we get from businesses considering vehicle graphics is whether they need a wrap or signwriting. The honest answer is that it depends on what the vehicle is for, what the brand looks like and what the budget allows.
When a wrap makes more sense
- Your brand uses photography, gradients or complex full-colour artwork that cannot be reproduced in cut vinyl
- You want maximum coverage of the vehicle surface for the strongest visual impact
- You are considering a colour change as well as branding
- The vehicle is high-visibility and the wrap is a primary advertising channel for the business
- You want to protect the original paintwork for resale value
When signwriting makes more sense
- Your brand is simple: a logo, business name and contact details in one or two colours
- Budget is the primary consideration and a clean cut vinyl result is preferable to a cheaper full wrap
- The vehicle is leased and you want the most straightforward removal option
- You need a quick turnaround: cut vinyl can often be produced and fitted faster than a printed wrap
In practice, many of the best-looking commercial vehicle schemes combine both: a printed wrap or printed panels in key areas alongside cut vinyl lettering for contact details and supporting information. We design these as integrated schemes and advise on the right combination for each brief. If signwriting rather than wrapping is the right fit for your business, our vehicle signwriting page covers that service in full.
Our Installation Process
STAGE 1
Initial Consultation
We start by getting to know your business, your brand, and your goals. Whether in person or remotely, we'll discuss your requirements, assess your site, and advise on the best signage solutions to suit your budget and vision.
STAGE 2
Design
Our in-house design team brings your ideas to life. We produce detailed visuals and technical drawings for your approval, ensuring every detail — from typography and colour to materials and sizing — is exactly right before anything goes to production.
STAGE 3
Production
Once the design is signed off, our skilled craftsmen get to work. Using quality materials and precision manufacturing techniques, we produce signage built to withstand the elements and represent your brand at its very best.
STAGE 4
Installation
Our experienced installation team handles everything from start to finish. We work safely, efficiently, and with minimal disruption to your business — leaving you with signage that's fitted correctly, finished beautifully, and ready to make an impression.
Why Brighton and Hove Businesses Choose Odysea for Vehicle Wraps
There are van wrap companies in most towns. What differentiates the good ones from the rest is not the printer, it is the process around it: how the design is developed, how the vehicle is prepared before fitting, how the material is applied around panel edges and curves, and what support you get if something needs attention after the job is done.
Everything in-house
We design, print and fit in-house at our Brighton base. There is no print trade supplier between us and the finished result, which means colour accuracy is our responsibility and quality control happens at every stage.
3M vinyl as standard
We use 3M vinyl and laminates throughout our vehicle wrap production. 3M is the recognised benchmark for commercial vehicle graphics: consistent colour, strong outdoor durability and a rated lifespan of five to eight years in normal use.
Designed for the vehicle, not the screen
A wrap that looks good as a flat design file does not always translate well onto a vehicle with compound curves, door handles and panel breaks.
Local, with proof
We are based in Brighton and have been working with local businesses since 2017. You can see completed vehicle projects in our works portfolio, and read more about our full signage offer on the sign makers in Brighton page.
WHY ODYSEA SIGNS?
20+ Years' Experience
Our installers have decades of combined experience across every sign type, surface, and situation — from traditional shopfronts to complex commercial developments.
Fully Insured & Compliant
Public liability insurance, CSCS cards, current RAMS documentation, and working at height certification — every paperwork requirement covered before we arrive on site.
Detailed Pre-Planning
Every installation is planned in advance — site visits, method statements, access planning — so there are no surprises on the day and no delays once the team arrives.
Standalone Installation
Already have your signs produced? We offer installation as a standalone service and will work with your artwork, supplier drawings, or any existing signage scheme.
Minimal Disruption
We respect your business and your customers. Installations are planned to minimise disruption — flexible scheduling, efficient working, and a clean site handed back promptly.
Nationwide for Multi-Site
Coordinating a multi-site rollout? We manage sequential or simultaneous installations across multiple locations — consistent output wherever you need it.
A full wrap covers every panel and changes the vehicle's colour completely. A partial wrap covers selected panels and leaves the base paint visible, which costs less while still giving strong coverage.
A full wrap is typically a multi-day job. The vehicle needs to be clean, dry and at a stable temperature, so it is fitted at our Brighton workshop rather than on site.
Yes. Cast vinyl is designed to be removed without damaging sound paintwork, which is why wraps suit leased vehicles and resale.
Generally, yes. The vinyl takes the stone chips and UV rather than the paint, so panels underneath often come up well when it is removed.
Hand wash where you can, and avoid harsh brushes and pressure washers held close to the edges. Looked after, a wrap stays sharp for years.
Start Your Signage Project
Tell us about your project and we'll come back with a free, no-obligation quote. Most clients hear from us within 24 hours.
